The welding positioner with torch frame ismainly used for the welding of annular welds. Its function is to tilt androtate the workpiece, so that the welds are placed in the best positions suchas horizontal and boat-shaped for welding. The equipment can fix the chuck onthe worktable. Or specific tooling is used to clamp workpieces for manualwelding, and can also be used with welding manipulators to achieve automaticwelding, and can also be used for cutting, grinding, assembly, testing andother processes.

This series of light positioner has thefollowing characteristics:

-1- The rotary mechanism of the positioneris driven by a DC motor, the rotation is steplessly adjustable, and the low speedis stable;

-2- Worm gear turning mechanism, withself-locking function, the turning angle is adjustable from 0 to 90 degrees;

-3- The worktable has a central throughhole, and long workpieces can directly pass through the through hole. Duringwelding, it is convenient for the shielding gas to pass into the inside of thepipeline and improve the welding efficiency. The central through hole ofHD-50/100 positioner is 45mm, HD-300 The center through hole of the positioneris 90mm;

-4- The special anti-electromagneticinterference design can effectively reduce the high-frequency interferenceduring TIG welding, and can effectively improve the welding quality;

-5- Configure the controller with automaticcontrol function to control the working state and working time of the weldingmachine, and realize the linkage between the positioner and the weldingmachine;

-6- The welding chuck and adjusting torchmechanism can be configured to fix the position of the welding torch and adjustthe relative position of the workpiece and the welding torch;

-7- The guide rail and the pneumatic topcan be configured to realize the self-centering and automatic clamping of theworkpiece;