HD-600 light welding positioner is mainlycomposed of electric control cabinet, left and right support frame, worktable,drive box, worm gear, manual locking device, drive motor, reducer and groundingdevice;

Features:

-1- This machine adopts the brand DC motor(with braking function) and has no inertial positioning characteristics;

-2- The axis of the turntable of themachine adopts the design of the central bearing hole;

-3- The surface of the disk is made ofductile iron, which is not deformed, and is equipped with a slot for assemblinga fixture in the middle;

-4- The tilting mechanism of the disksurface of the machine adopts the design of worm gear and worm, which makes theangle adjustment easy and the tilt angle is correct;

-5- The grounding device is composed ofcopper alloy carbon brushes, which is convenient to protect the motor andpositioner bearings;

-6- The welding gun holder, time control,pneumatic tailstock, welding chuck, etc. can be added on the basis of thepositioner according to user needs;

Product installation and debugging:

-1- There are four screw positioning holesat the bottom of the two sides of the machine;

-2- Connect the grounding copper brush ofthe machine to the base metal wire of the welding machine firmly;

-3- Check whether the power supply isconsistent with the marked voltage of the equipment. After confirmation, fixthe workpiece to be welded on the disk surface to ensure the concentricity ofthe product, and adjust the corresponding position of the welding torch and theworkpiece to be welded;

-4- According to the required welding angleof the workpiece, adjust the disk surface to the required angle with thehandwheel;

-5- After adjusting the position, connectone end of the connecting wire of the welding machine to the control box, andthe other end to the switch control part of the welding machine, and then turnon the power before welding;

Product safety precautions:

-1- This equipment needs to have a goodgrounding device;

-2- The working voltage of this equipmentis AC 220V/50HZ, do not connect to other voltage grids, otherwise the equipmentwill not work normally or damage the electrical appliances inside the controlbox;

-3- The inside of the control box of thisequipment is electrified, and non-professionals are not allowed to open itwithout authorization to avoid the danger of electric shock;